Categories

System hiccups and false alarms can be exasperating, and even worse, could prevent your home security system from working the way it should. Thankfully, most issues, from false alarms to dead batteries, are straightforward to remedy. Explore our recommendations for troubleshooting your home alarm system in Shreveport. We’ll help keep your family shielded and your system operating smoothly.

Test Your Home Security System In Shreveport

One of the most sensible ways to troubleshoot your property’s defense is to test it yourself! Modern systems allow you to put them in test mode to avoid prompting an emergency response from monitoring agents. Once you’re in test mode, take these steps:

• Activate your system as you normally would when heading out.
• Open a door or window protected by a contact sensor, or test other sensors. Shut the window or door once you’re done so it doesn’t prompt the alarm when you switch out of test mode.
• Allow the alarm to resonate for 60 seconds to ensure communications with the security provider and to produce an entry in the alarm system log.
• Continue testing equipment as needed
• Inspect the alarm’s activity log to confirm that everything’s working.

Don’t worry, monitoring professionals will know that your alarm system is involved in a test. Be sure to switch off test mode when complete. It’s smart to test monthly or anytime you change your home’s internet or phone service.

Evaluate The Position And Condition Of Motion Detectors

Although an crucial element of your alarm system, motion sensors are prone to false alarms. Prevent them with a few simple troubleshooting steps.

• Perform a visual inspection. Is there anything that could move within the path of the sensor, like a curtain caught in a breeze?
• Is the sensor clean? Grime, dirt, and cobwebs can result in poor performance. Ensure the device is clean.
• Does the motion detector have pet immunity you can turn on? Some sensors can be configured to disregard pets weighing up to 100 pounds.
• When was the battery changed? A nearly depleted battery can impact performance or lead to false alarms.
• Is a heat source impacting the sensor? Too much heat from a fireplace, direct sun, or something else can cause an alarm.

Keep Batteries On Hand And Pay Attention To Low Battery Signals

One helpful perk of modern home security systems is that they’ll notify you when batteries are running low. If your system is equipped with a mobile app or control panel, you’ll often see alerts there. Depending on your alarm, you might hear an occasional beep when batteries are low. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that will have to be replaced every so often. It’s wise to keep batteries ready and create a replacement schedule. Some systems also include a rechargeable backup battery for the central control panel. This backup battery helps keep your system functioning if your power goes out and should recharge once power is restored. If it doesn’t, you will have to replace it.

Troubleshooting Is Simple With ADT Home Security In Shreveport 

As the leading name in home security, ADT designs systems that supply unrivaled functionality and convenience. Accessing test mode is straightforward through the ADT+ app or MyADT.com, and you’ll always receive alerts when a battery is nearing depletion. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system ideal for your Shreveport home. Call (318) 228-1466 or submit our form today!